รุ่น 220SL PrecisionCutรถตัดกรีนแบบเดินตามรุ่น 220SL PrecisionCut
- ราวสำหรับมือจับรูปห่วงปรับได้เพื่อความสบายและการควบคุมขั้นสูงสุด
- อุปกรณ์ยางลดการสั่นสะเทือน เพื่อการสะเทือนที่ลดน้อยลง
- การปรับใบมีดล่างถึงพวงใบมีดที่เข้าถึงได้ง่าย
คุณลักษณะเฉพาะและการเปรียบเทียบ
เพิ่มรุ่น
คุณลักษณะเฉพาะและการเปรียบเทียบ |
||||
|---|---|---|---|---|
| เลือกสูงสุด 4 รุ่นเพื่อเปรียบเทียบคุณลักษณะเฉพาะ | John Deereรุ่น 220 SL PrecisionCutรถตัดกรีนแบบเดินตามรุ่น 220SL PrecisionCut |
Engine
| Type | Air-cooled, Gas | |||
|---|---|---|---|---|
| Cycle | 4-cycle | |||
| Bore and stroke | 60x42 mm 2.36x1.65 in. |
|||
| Piston displacement | 7.2 cu in. 118 cc |
|||
| Compression ratio | 8.5:1 | |||
| Horsepower | At 3600 rpm: 2.6 kW 3.5 hp Engine Manufacturer Net Power, Tested in accordance with SAE J1349. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s web site for additional information. |
|||
| Direction of rotation of output shaft | Counterclockwise viewed from shaft side | |||
| Inclination limit | Tilted up to 20 degrees in any direction | |||
| Idle speed at output shaft | 1400 (+/- 150) rpm | |||
| Maximum speed at output shaft | 2950 (+/- 150) rpm |
Fuel
| Type | Regular grade unleaded or leaded | |||
|---|---|---|---|---|
| Tank capacity | 2.5 L 2.7 U.S. qt |
Oil
| Type | SAE 30 or SAE 10W-30 | |||
|---|---|---|---|---|
| Capacity | 0.57 L 0.6 U.S. qt |
|||
| Differential drive capacity | 0.7 pt 0.35 L |
Cutting Equipment
| Cutting width | 45.7 cm 18 in. |
|||
|---|---|---|---|---|
| Cutting height - minimum | --- | |||
| Cutting height - Standard - 3.0-mm bedknife | Min. 3.2 mm 0.125 in. Max. 22 mm 0.875 in. option |
|||
| Cutting height - Optional - 2.5-mm bedknife | Min. 2.5 mm 0.11 in. Max. 22 mm 0.875 in. option |
|||
| Cutting height - Optional - 2.0-mm bedknife | Min. 2.0 mm 0.078 in. Max. 22 mm 0.875 in. standard |
|||
| Cutting height - Optional - tee bedknife | --- | |||
| Frequency of clip standard | 11 blade, 14 blade: 4.62 0.182 in. Optional speed up kit 11 blade, 14 blade: 3.94 mm< br/>0.155 in. |
Reel
| Diameter | 127 mm 5 in. |
|||
|---|---|---|---|---|
| Number of blades | 11 or 14 blade | |||
| Material | Heat-treated chromium molydenum steel | |||
| Bedknife - standard | --- |
Optional Rotary Brush and Greens Tender™ Conditioner (GTC)
| Brush | Interlocked with reel, rotation in reverse direction; 2-3/8-in. (60-mm) diameter nylon | |||
|---|---|---|---|---|
| Vertical cutter blades | Specially hardened carbon tool steel; star shaped; 2-3/8-in. (60-mm) diameter, 75 blades | |||
| Adjustable brush or cutter height | Brush even with height-of-cut; GTC below height-of-cut maximum: 0.8 mm 0.0313 in. |
|||
| Gear drive | Gear driven from reel shaft, opposite direction of reel, rotation powers brush or vertical cutter |
Grass Catcher
| Size, lb (kg) | 2.7 kg 6 lb |
|||
|---|---|---|---|---|
| Type | Polyethylene |
Clutches
| Transport | Belt tension | |||
|---|---|---|---|---|
| Reel jaw-type clutch | On/off | |||
| Brush/GTC jaw-type clutch | On/off | |||
| Traction drum | Dual, aluminum |
Traveling Device
| Forward speed | With transport wheels at 3000 engine rpm: 7.2 km/h 4.5 mph |
|||
|---|---|---|---|---|
| Roller - rear | Aluminum, diameter: 190 mm 7.5 in. |
|||
| Roller - front (grooved or smooth) | Machined steel, diameter: 50 mm 2 in. for cutting height adjustment |
Dimensions
| Length (with tires installed) | 94.0 cm 37 in. |
|||
|---|---|---|---|---|
| Width (with tires installed) | 94.6 cm 37.25 in. |
|||
| Height (with tires installed) | 119 cm 47 in. |
|||
| Weight (less GTCs, gear drive and transport wheel with catcher) | 99.5 kg 219 lb |
Sound Levels
| Operator ear | 82 dBA | |||
|---|---|---|---|---|
| Measuring standard | ISO 11201 | |||
| Attachments installed | GTCs, reels engaged |
Certificate
| Type | ANSI B71.4-2004 |
|---|
Additional Information
| Date collected | --- |
|---|
