D105D105 Lawn Tractor
- Automatic transmission
- Cast-iron front axle will not bend
- Edge Cutting System gives superior performance
- 2-year/120-hour bumper-to-bumper warranty
Features
Expand All
Collapse All
42-in. (107-cm) Mower Deck
Mower wash port
Mower wash port with hose connector
StarLock blade design
Mower deck height adjustment lever
17.5-hp (13.0-kW) engine
Engine oil filter and fuel filter
No-tools oil drain valve
D105 Tractor used for trimming along flower bed
Brake pedal
Automatic transmission forward/reverse shift lever
Speed control pedal
Speed control pedal in use
The Edge™ Cutting System gives superior performance
42-in. (107-cm) Mower Deck
The Edge Cutting System has been trademarked to emphasize the advantages of the John Deere mower deck designs. They give the mower superior convenience, performance, and reliability.
The 42-in. (107-cm) two-spindle, three-in-one mower is constructed of 13 gauge, 0.090 in. (2.3 mm) steel for long life:
- Deep-deck mower design lifts grass for a clean, even cut.
- Smooth underside of mower prevents grass buildup and evenly disperses grass clippings.
- The rolled outer edge of the deck provides extra strength and protection.
- Dual-stage E-coat and powder paint coatings provide extra protection from rust.
- No tools are required to go from mulching to side discharge to rear bagging.
- Mulch cover is an optional attachment.
- High-performance mulch plug is an optional attachment.
The mower deck has a rolled lip to provide greater strength and protection.
The blade-to-spindle design provides a unique mounting system for the mower blade that gives extra safety and convenience.
A cut-and-throw 6.5-bu (229-L) rear bagger is sold separately.
MOWER WASH PORT
Mower wash port
Mower wash port with hose connector
A wash port is provided to make cleaning the underside of the mower deck easy:
-
A hose connector is included with mower deck.
STARLOCK™ BLADE DESIGN
StarLock blade design
The StarLock blade design keeps the blade bolt at the correct torque for easy removal.
Optional blades for difficult mulching or bagging conditions are available.
MOWER DECK HEIGHT ADJUSTMENT
Mower deck height adjustment lever
Spring-assisted, low-effort lift lever simplifies setting and adjusting the mower cut height:
-
Increments of 0.25-in. (0.64-cm) allow fine-tuning the cut height.
Powerful engine features full-pressure lubrication for long life
17.5-hp (13.0-kW) engine
Engine oil filter and fuel filter
A 17.5-hp (13.0-kW) single-cylinder engine has plenty of power and torque to handle tough mulching, mowing, and bagging conditions:
- Electronic ignition for fast starts
- Cast-iron sleeve for long engine life
- Overhead valves for excellent power and fuel economy
- Anti-vibration system
- Full-pressure lubrication and oil filter for cleaner oil, prolonging engine life and extending the time between oil changes
- Also more effective when operating the tractor on an incline
- Large fuel filter for trouble-free operation
No-tools oil drain valve
No-tools oil drain valve provides easy access for oil changes.
Automatic transmission makes it easy to choose the exact travel speed for each operating condition
D105 Tractor used for trimming along flower bed
The automatic transmission allows the operator to easily choose the desired forward or reverse travel speed, simply by depressing a single foot pedal; this is similar to the way the driver of an automobile with automatic transmission changes speed when depressing the accelerator.
No matter whether a slow speed for trimming or faster speed for open-area mowing is desired, the operator can easily adjust, by how far the foot pedal is depressed.
Brake pedal
Automatic transmission forward/reverse shift lever
With the brake pedal depressed and the forward/reverse lever in the center park or the forward position, the engine can be started. Once the engine is started, it is not necessary to use the brake pedal when selecting forward or reverse or when changing direction of travel. Simply move the forward/reverse lever to select travel direction, and then press the automatic foot pedal to choose from an infinite number of travel speeds.
Speed control pedal
Speed control pedal in use
With the automatic speed control pedal, the operator can choose from an infinite number of speeds forward or reverse:
- Forward: 0 to 5.5 mph (0 to 8.9 km/h)
- Reverse: 0 to 3.2 mph (0 to 5.1 km/h)
Specifications
Add Model
| Specifications | ||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications | John Deere D105 D105 Lawn Tractor |
Engine
| Power | 17.5 hp 13 kW | |||
|---|---|---|---|---|
| Displacement | 30.5 cu in. 500 cc | |||
| Manufacturer/model | 31R977 (M31) | |||
| Type | Overhead valve, full-pressure lube, oil filter | |||
| Cylinders | One | |||
| Governor | Mechanical | |||
| Choke/speed control | One lever | |||
| Cooling method | Air | |||
| Air cleaner | Cartridge | |||
| Oil drain | No tools |
Fuel system
| Type | Gasoline | |||
|---|---|---|---|---|
| Fuel delivery | Pulse pump and carburetor | |||
| Fuel gauge | Mechanical, viewable from seat | |||
| Fuel tank location | Rear | |||
| Fuel fill opening | Center, 2 in. 5.1 cm | |||
| Fuel tank capacity | 2.4 U.S. gal. 9.1 L |
Electrical system
| Battery | 12 V 195 CCA | |||
|---|---|---|---|---|
| Charging system | Regulated, 9 amp | |||
| Engine starter | Bendix type | |||
| Hourmeter | Yes, with service reminder | |||
| Headlights | Two standard, incandescent | |||
| Taillights or reflector | No | |||
| Backup lights | No | |||
| Rear work lights | No | |||
| 12-V outlet | No |
Transaxle
| Type | Automatic, continuously variable transmission (CVT) | |||
|---|---|---|---|---|
| Control | Foot | |||
| Cruise control | No | |||
| Oil cooler | No | |||
| Oil filter | Not applicable | |||
| Differential lock | No | |||
| Forward speed | 0-5.5 mph 0-8.9 km/h | |||
| Reverse speed | 0-3.2 mph 0-5.1 km/h | |||
| Brakes | Disc |
Chassis
| Frame | Full-length welded steel | |||
|---|---|---|---|---|
| Primer/paint | E-coat/powder | |||
| Weight bracket | Optional rear | |||
| Receiver hitch | No | |||
| Front axle | Cast iron front axle, front wheel ball bearings | |||
| Spindle bushings | No | |||
| Front tires | 15x6-6 | |||
| Rear tires | 20x8-8 | |||
| Hood material | JD Loy, UV resistant | |||
| Fender deck material | Stamped steel | |||
| Floor mats | Yes | |||
| Storage | No | |||
| Service interval decal | Yes | |||
| Fender handles/grips | No | |||
| Cup holder | Yes | |||
| Equipment mounting | Cargo Mount system |
Steering
| Type | Sector and pinion with single drag link and tie rod | |||
|---|---|---|---|---|
| All-wheel steer | Not available on this model | |||
| Steering wheel | Standard, diameter - 12 in. 30.5 cm | |||
| Tilt steering wheel | No | |||
| Turning radius | 18 in. 45.7 cm | |||
| Uncut circle radius | 25 in. 63.5 cm |
Seat
| Type | One piece | |||
|---|---|---|---|---|
| Seat back height | 11 in. 27.9 cm | |||
| Armrests | No | |||
| Fore-aft adjustment | While seated, 5.5 in. 14 cm | |||
| Seat suspension | Tilt, two coil springs |
Lift system
| Type | Lever on fender deck | |||
|---|---|---|---|---|
| Hydraulic outlets | No | |||
| Mower cut height | 13 positions, 1-4 in. 2.5-10.2 cm | |||
| Cut height increments | 0.25 in. 0.64 cm | |||
| Preset cut height | No |
Mower deck
| Type | Side discharge | |||
|---|---|---|---|---|
| Cutting width | 42 in. 107 cm | |||
| Construction | Stamped steel deck shell | |||
| Mower deck material | Steel, 13 gauge 0.09 in. 2.3 mm | |||
| Mower wash port | Yes | |||
| Mower drive system | Manual PTO | |||
| Mower wheels | Two | |||
| Mower wheel adjustment | One bolt | |||
| Mower level adjustment | Easy-level deck |
Safety
| Meets ANSI standard | Yes | |||
|---|---|---|---|---|
| Meets OPEI standard | Yes | |||
| Backup protection | Reverse Implement Option (RIO) | |||
| Safety video | Yes |
Buyer's notes
| Notes | JD Loy hood resists fading, won't rust or dent Durable primer and powder paint finish Full-length welded steel frame | |||
|---|---|---|---|---|
| Warranty | 2 year/120 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Optional equipment
| Mowers | Standard, 42 in. 107 cm | |||
|---|---|---|---|---|
| Rear bagger | 2-bag, 6.5 bu 229 L | |||
| Mulching system | Mulch cover or high-performance plug | |||
| Front blade | 46 in. 116.8 cm | |||
| Snow blower | Two-stage, 44 in. 111.8 cm | |||
| Sprayer | Tow-behind only, 15 U.S. gal. 56.8 L Tow-behind only, 25 U.S. gal. 94.6 L | |||
| Spreader | Tow-behind only, 125 lb 57.7 kg | |||
| Front bumper | Two-bar styled front bumper | |||
| Weather protection | Snow cab | |||
| Sun canopy | Yes | |||
| Bucket holder | Yes, single bucket | |||
| Grass striping | Lawn striping kit | |||
| Tow-behind tools | 16 |
Dimensions
| Height | 42.5 in. 108 cm | |||
|---|---|---|---|---|
| Overall length | 68.8 in. 174.8 cm | |||
| Wheelbase | 48.9 in. 124.2 cm | |||
| Width with mower | 54.9 in. 139 cm | |||
| Width with mower (deflector raised for storage) | 44.8 in. 114 cm | |||
| Weight | Mower, no fuel, 393 lb 178 kg |