At 2600 rpm: 27.7 kW 37.1 hp *Engine hp is provided by the engine manufacturer to be used for comparison purposes only. Actual operating hp will be less. Refer to the engine manufacturer’s web site for additional information.
Cylinders
Three
Displacement
1496 cc 91.3 cu in.
Air cleaner
2-stage dry element
Fuel
Diesel
Cooling system
Liquid centrifugal pump
Vehicle
Traction drive
Hydrostatic pump to wheel motors; GRIP All-Wheel Drive Traction System engaged during transport and mow
Drive pump
Gear
Cutting units drive
---
Hydraulic system capacity
37.1 L 9.8 U.S. gal.
Fuel tank capacity
49.21 L 13 U.S. gal.
Steering
Hydraulic power with double acting steering cylinder
Front drive tires
24 x 12 - 12 turf trac
Steering tires
24 x 12 - 12 multi trac
Ground pressure
96.5 kPa 14 psi
Brakes
Disc and dynamic braking through closed loop hydrostatic system
ROPS
Standard; meets pending ISO 21299 standards
Operating Weight
Cutting units lowered
Decks up: 1190 kg 2624 lb Decks down: 928 kg 2045 lb
Controls
Throttle
Hand throttle
Forward/reverse
Dual pedal
Mower lift
One-touch single handle
Parking brake
Electric Switch on Command Arm for Internal Wet Disk Brakes
Seat
Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment
PTO
Hand lever
Ignition
Key start
Work lights
Switch
Tilt steering
Foot operated
Operator display
Hourmeter, LED warning lights, and automatic engine pre-heat
Storage
Cup holder and two-way radio
Dimensions
Height with ROPS
210.8 cm 83 in.
Length
312.4 cm 123 in.
Transport width
179 cm 70.5 in. With width of cut of: 173 cm 68 in. 194.3 cm 76.5 in. With width of cut of: 188 cm 74 in.
Mowing position width
---
Wheelbase
152.4 cm 60 in.
Ground speed
----
Mowing
0-10 km/h 0-6 mph
4WD mow speed
---
Transport
0-14 km/h 0-9 mph
Reverse
0-6.4 km/h 0-5 mph
Cutting Units
Number
3 Rotary decks No Tool Adjustment
Size
68.6 cm 27 in.
Total width of cut
172.7 cm 68 in. Or 188 cm 74 in.
Height of cut
2.5-10.2 cm 1-4 in. With increments of 0.6 cm 0.25 in. No tool adjustment
Height of cut - construction
---
Frequency of clip (FOC Reels) or Blade tip speed (decks) - rollers
Optional: grooved, solid, or spiral: 7.5 cm 3 in.
Reel diameter
17.8 cm 7 in.
Bedknife adjustment
Reel-to-bedknife
Backlapping
Standard
Sound levels
Operator ear full engine
---
Operator ear reduced engine rpm (2300 rpm)
---
Measuring standard
---
Attachments installed
---
Warranty
Type
Two-year limited
Fuel Economy
Actual fuel usage will vary depending on course conditions, operation, turf and fuel quality